ANTİPASLI ASTAR BOYA
DESCRIPTION: Modified alkyd resin based, excellent covering property, extra corrosion resistance, does not contain lead and aromatic solvent synthetic based decorative purpose paint primer.
PROPERTIES:ALBERA ANTİPASLI ASTAR is a superior adhesion property and extra corrosion resistance ability synthetic based paint primer. The resistance to yellowing is strengthened. It has a excellent hiding ability. It does not spill and blister. It does not flow after application.
FLASH POINT : > 38 °C
APPLICATION AREAS: ALBERA ANTİPASLI ASTAR can be used safely in all types of interior and exterior areas such as metal, wooden, plaster, gypsum plaster, plaster board, exposed concrete, MDF and chipboard surfaces.
APPLICATION: The surfaces to be applied by ALBERA ANTİPASLI ASTAR should be dry, clean, sound and free from dust.Blistered and / or loose areas on the surface should be absolutely blasted and surface prepared. Surface oil, soot, rust and dirty areas should be cleaned with suitable materials before application. Sanding should be done on old painted surfaces to be painted.Topcoat paint application must be done after 24 hours priming with ALBERA ANTİPASLI ASTAR. During application, care must be taken that the surface and ambient temperature is between +5 °C and +30 °C. Application can be done by brush, roller or spray method. Tools can be cleaned with synthetic thinner.
THINNING RATIO: Dilute %20 by volume with synthetic thinner (approx. 0,50 liters of synthetic thinner for 2,5 L packaging).
DRYING TIME: ( 20 °C, HR %65 )Touch drying time 2-4 hours, dust retention time 5-6 hours,top coat paint application time 24 hours.
CONSUMPTION: Depending on the condition of type of surface, absorption and ambient conditions to be applied, with 1 liter can be primed 10-14 m² on one coat.
STORAGE CONDITIONS: It has a shelf life of 2 years inareas without direct sunlight and in an environment with ambient temperature between +5 °C and +30 °C for unopened packages. Opened and used products can be stored by adding sufficient amount of synthetic thinner on it if tightly closed.
PACKAGING:12,5 L, 2,5 L and 0,75 L metal containers.
RISK PHRASES
R10 – Flammable.
R22 -Harmful if swallowed.
R43- May cause sensitisation by skin contact.
R51- Toxic to aquatic organisms.
R66- Repeated exposure may cause skin dryness or cracking.
R67- Vapours may cause drowsiness and dizziness.
SAFETY PHRASES
S2- Keep out of the reach of children.
S7- Keep container tightly closed.
S9- Keep container in a well-ventilated place.
S16- Keep away from sources of ignition – No smoking.
S23- Do not breathe vapor.
S24/S25- Avoid contact with skin and eyes.
S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28- After contact with skin, wash immediately with plenty of water and soap.
S29- Do not empty into drains.
S46- If swallowed, seek medical advice immediately and show this container or label.
PROPERTIES:ALBERA ANTİPASLI ASTAR is a superior adhesion property and extra corrosion resistance ability synthetic based paint primer. The resistance to yellowing is strengthened. It has a excellent hiding ability. It does not spill and blister. It does not flow after application.
FLASH POINT : > 38 °C
APPLICATION AREAS: ALBERA ANTİPASLI ASTAR can be used safely in all types of interior and exterior areas such as metal, wooden, plaster, gypsum plaster, plaster board, exposed concrete, MDF and chipboard surfaces.
APPLICATION: The surfaces to be applied by ALBERA ANTİPASLI ASTAR should be dry, clean, sound and free from dust.Blistered and / or loose areas on the surface should be absolutely blasted and surface prepared. Surface oil, soot, rust and dirty areas should be cleaned with suitable materials before application. Sanding should be done on old painted surfaces to be painted.Topcoat paint application must be done after 24 hours priming with ALBERA ANTİPASLI ASTAR. During application, care must be taken that the surface and ambient temperature is between +5 °C and +30 °C. Application can be done by brush, roller or spray method. Tools can be cleaned with synthetic thinner.
THINNING RATIO: Dilute %20 by volume with synthetic thinner (approx. 0,50 liters of synthetic thinner for 2,5 L packaging).
DRYING TIME: ( 20 °C, HR %65 )Touch drying time 2-4 hours, dust retention time 5-6 hours,top coat paint application time 24 hours.
CONSUMPTION: Depending on the condition of type of surface, absorption and ambient conditions to be applied, with 1 liter can be primed 10-14 m² on one coat.
STORAGE CONDITIONS: It has a shelf life of 2 years inareas without direct sunlight and in an environment with ambient temperature between +5 °C and +30 °C for unopened packages. Opened and used products can be stored by adding sufficient amount of synthetic thinner on it if tightly closed.
PACKAGING:12,5 L, 2,5 L and 0,75 L metal containers.
RISK PHRASES
R10 – Flammable.
R22 -Harmful if swallowed.
R43- May cause sensitisation by skin contact.
R51- Toxic to aquatic organisms.
R66- Repeated exposure may cause skin dryness or cracking.
R67- Vapours may cause drowsiness and dizziness.
SAFETY PHRASES
S2- Keep out of the reach of children.
S7- Keep container tightly closed.
S9- Keep container in a well-ventilated place.
S16- Keep away from sources of ignition – No smoking.
S23- Do not breathe vapor.
S24/S25- Avoid contact with skin and eyes.
S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28- After contact with skin, wash immediately with plenty of water and soap.
S29- Do not empty into drains.
S46- If swallowed, seek medical advice immediately and show this container or label.
