DECORİT
Dekoratif Püskürtme Boya
- Su Bazlı
- Mat
- Yüksek Ezilme Direnci
- Özel Görünümlü Tane Doku
DESCRIPTION: Styrene acrylic copolymer emulsion based, water based, matt, high crush resistance property decorative interior spray ceiling and wall paint.
PROPERTIES:ALBERA DECORİT is water based, matt, high crush resistance property, special looking grain surface appearance decorative interior spray ceiling and wall paint. It has a excellent adhesion to applied surfaces. It does not spill and blister. It protects the appearance of special grains without crushing during paint application.
APPLICATION AREAS: ALBERA DECORİT can be used safely in all type of mineral substrate, plaster, plaster board surfaces.
APPLICATION: The surfaces to be applied by ALBERA DECORİT should be dry, clean, sound and free from dust.Blistered and / or loose areas on the surface should be absolutely blasted and surface prepared. Surface oil, soot, rust and dirty areas should be cleaned with suitable materials before application. For old painted surfaces ALBERA TRANS ASTAR, for plastered or highly absorbent surfaces ALBERA BOND ASTAR is recommended as a primer before application. During application, care must be taken that the surface and ambient temperature is between +5 °C and +30 °C. Application can be done one coat by special gun or air compressor spray method. Tools can be cleaned with water.
THINNING RATIO: Dilute %5 by volume with water (approx. 0,75 liters of water for 25 kg packaging). Absolutely clean water should be used.
DRYING TIME: ( 20 °C, HR %65 )Touch drying time 4 hour, exact drying time 24 hours. The application should be protected from freezing conditions during the exact drying period.
CONSUMPTION: Depending on the condition of type of surface, absorption and ambient conditions to be applied, with 1 kg can be painted 2-3 m² on one coat.
STORAGE CONDITIONS: It has a shelf life of 1 years inareas without direct sunlight and in an environment with ambient temperature between +5 °C and +30 °C for unopened packages.Storage environment should be absolutely protected from freezing. Opened and non-thinned products can be stored if tightly closed.
PACKAGING:25 kg containers.
RISK PHRASES
R22 - Harmful if swallowed.
R43 - May cause sensitisation by skin contact.
R51 - Toxic to aquatic organisms.
R66 - Repeated exposure may cause skin dryness or cracking.
SAFETY PHRASES
S2 - Keep out of the reach of children.
S24/S25 - Avoid contact with skin and eyes.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28 - After contact with skin, wash immediately with plenty of water and soap.
S29 - Do not empty into drains.
S64 - If swallowed, rinse mouth with water (only if the person is conscious).
This product is manufactured in Albera facilities with conformity to TS EN ISO 9001: 2008 standards.
PROPERTIES:ALBERA DECORİT is water based, matt, high crush resistance property, special looking grain surface appearance decorative interior spray ceiling and wall paint. It has a excellent adhesion to applied surfaces. It does not spill and blister. It protects the appearance of special grains without crushing during paint application.
APPLICATION AREAS: ALBERA DECORİT can be used safely in all type of mineral substrate, plaster, plaster board surfaces.
APPLICATION: The surfaces to be applied by ALBERA DECORİT should be dry, clean, sound and free from dust.Blistered and / or loose areas on the surface should be absolutely blasted and surface prepared. Surface oil, soot, rust and dirty areas should be cleaned with suitable materials before application. For old painted surfaces ALBERA TRANS ASTAR, for plastered or highly absorbent surfaces ALBERA BOND ASTAR is recommended as a primer before application. During application, care must be taken that the surface and ambient temperature is between +5 °C and +30 °C. Application can be done one coat by special gun or air compressor spray method. Tools can be cleaned with water.
THINNING RATIO: Dilute %5 by volume with water (approx. 0,75 liters of water for 25 kg packaging). Absolutely clean water should be used.
DRYING TIME: ( 20 °C, HR %65 )Touch drying time 4 hour, exact drying time 24 hours. The application should be protected from freezing conditions during the exact drying period.
CONSUMPTION: Depending on the condition of type of surface, absorption and ambient conditions to be applied, with 1 kg can be painted 2-3 m² on one coat.
STORAGE CONDITIONS: It has a shelf life of 1 years inareas without direct sunlight and in an environment with ambient temperature between +5 °C and +30 °C for unopened packages.Storage environment should be absolutely protected from freezing. Opened and non-thinned products can be stored if tightly closed.
PACKAGING:25 kg containers.
RISK PHRASES
R22 - Harmful if swallowed.
R43 - May cause sensitisation by skin contact.
R51 - Toxic to aquatic organisms.
R66 - Repeated exposure may cause skin dryness or cracking.
SAFETY PHRASES
S2 - Keep out of the reach of children.
S24/S25 - Avoid contact with skin and eyes.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28 - After contact with skin, wash immediately with plenty of water and soap.
S29 - Do not empty into drains.
S64 - If swallowed, rinse mouth with water (only if the person is conscious).
This product is manufactured in Albera facilities with conformity to TS EN ISO 9001: 2008 standards.
